[STOCK][M] H850 10C OPEN EU ROM + Flashable ZIPs + All IMGs + KDZ LG G5

LG-H850 10C OPEN EU

This thread provides a stock H850 OPEN EU 10C TWRP-flashable update for 10C as well as the 10C KDZ and all IMGs.

Information:
10C is the first update since the initial 10A build.

Android Version: 6.0.1
Android security patch level: 2016-04-01
Baseband version: MPSS.TH.2.0.c1.4-00014-M8996FAAAANAZM-1.45732.6.48263.2
Kernel version: 3.18.20
Build number: MMB29M
Software version H85010c
Stock 10C build.prop :

Install Directions:

LG Bridge Directions:
1. Download and install LG Bridge for Windows or Mac.
2. Launch LG Bridge and connect G5 while it is still booted in Android.
3. LG Bridge will detect and connect to your device then scan for updates. Update if available.

LGUP Directions:
1. Download and install the following three(3) files on Windows PC:

• LGUP_Lab_Frame_Ver_1_11.msi
• LG*InsertModelHere*_DLL.msi for correct G5 model [Ex: LGH850_DLL.msi]
• Latest LG Windows PC drivers from the drivers section above

2. Download KDZ or TOT. Need help finding KDZ? Try http://bit.ly/lgkdzlist
3. Turn OFF device then place in Download Mode: Hold Volume Up while plugging in USB cable.
4. Run LGUP and flash software

• Select device
• Check BIN File box under File Type then select KDZ/TOT file
• Check Refurbish box in center of program.
• Close and reopen LGUP then click START button to flash file to G5.

LGUP DOWNLOADS

Install via TWRP:
To flash the 10C ZIPs you must have TWRP 3.0.2 or higher.
And, of course, you must have your bootloader unlocked for TWRP to work. Currently only H850 EU variants have official unlock.

These directions should be used by everyone who wants a rooted 10C system.
Don't want root? Then just skip the SuperSu steps.

1. Download the following two files and place on G5 internal or external SD card (use ext-sd to keep internal data encrypted)

• LG-H85010C-Flashable.COMPLETE.zip
• Latest SuperSU 2.65 or higher. [STABLE] or [BETA] Thanks to Chainfire!

2. (re)Boot into TWRP
3.* Backup current partitions: boot, system, data [*Optional but suggested]
4.* Wipe data (TWRP > Wipe > Swipe slider) [*Optional but not needed if coming from stock 10A, 10B or 10C]
5. Install the two ZIPs on sdcard, one at a time:

• LG-H85010C-Flashable.COMPLETE.zip (Install > select zip > swipe to confirm/flash)
• SuperSU zip (Install > select zip > swipe to confirm/flash)

After zips finish flashing you can reboot! If TWRP asks if you want to install SU, hit no. If TWRP says No OS installed, ignore it.

Downloads:

LG-H85010C-Flashable.COMPLETE.zip
100% stock untouched system, boot, modem and bootloader.

LG-H85010C-Flashable.Modem.zip
LG-H85010C-Flashable.Boot.zip
LG-H85010C-Flashable.Bootloader.zip
H85010c_00_OPEN_EU_OP_0415.kdz (SWS)
H85010c_00_VDF_COM_OP_0415.kdz (VDF/VD2)

Codefire Directories:
G5 IMGs, drivers, flash tools, DLLs, KDZs, ZIPs and more can be found in the following directories...
LG-H85010C | LG-H850 | LG G5

MD5 Sums:
Click button below to view MD5 for each file...

MD5 (aboot.img) = a0245f12ecbc0b94b663112a24aa1f34
MD5 (apdp.img) = f74d23f22f37e1be3979bc7ce88eca6e
MD5 (boot.img) = 35e7f98c7d998f2f891945a15d4e9295
MD5 (cmnlib.img) = fbd2784aae98033be27eee16807bd504
MD5 (cmnlib64.img) = 32a9487ffbee4bedccd88e7b4e471db4
MD5 (cust.img) = d61d8db37d60ea1db4f6406ccd9a417f
MD5 (devcfg.img) = 99841d620805b09247782b333dafe228
MD5 (factory.img) = 15bc82584049ec3a7c62d921c2897267
MD5 (hyp.img) = 3078e017f130ad65acdb3e01fb62f5e9
MD5 (keymaster.img) = f53a3d3200829a0d550eeb9103d8fc3b
MD5 (laf.img) = 2bd330dc03c8277e7c4d91ff75613b79
MD5 (modem.img) = 49cdfd04500f251047234956a638cf28
MD5 (msadp.img) = db86bd3e4538752559fd2e4ad9934587
MD5 (OP_OPEN_EU.img) = 81b984636745b61c4432340f93d237e5
MD5 (persist.img) = fe89cbd4d4ba8d59cc03c66ff9c57a74
MD5 (pmic.img) = 717679d130698d4ebec5897e95a42263
MD5 (raw_resources.img) = b6adf0702e21178df938bd641a07bca4
MD5 (rct.img) = 15bc82584049ec3a7c62d921c2897267
MD5 (recovery.img) = 7e41c4e404efa2d18d49c0c07dc40b42
MD5 (rpm.img) = 56499823596fadda38bf752b8f3fbc6b
MD5 (sec.img) = 628756d1475c7e6ffa2f974c63261bf6
MD5 (system.img) = aadf8003e8c4ea51c1a2fc02eadfe23d
MD5 (tz.img) = 6453a466b9ba912c8da60350a3f03944
MD5 (xbl.img) = db92c6f5942405eac5d717106f1767ad
MD5 (xbl2.img) = db92c6f5942405eac5d717106f1767ad

MD5 (LG-H85010C-Flashable.Boot.zip) = d6a457456b4509965a3659cf3fa194c3
MD5 (LG-H85010C-Flashable.Bootloader.zip) = 92b81b989be65bf755e2066a2c948825
MD5 (LG-H85010C-Flashable.COMPLETE.zip) = c4a1c7c6b51fe1788675e5ce00c2d070
MD5 (LG-H85010C-Flashable.Modem.zip) = 749c38f5e7eea52f1db20e1c6bbb6e32
MD5 (H85010c_00_OPEN_EU_OP_0415.kdz) = 2f0f3651194f3ee77411618f4f356e9d

FAQ:
Q: I get a mismatch region code error on boot up after flashing this, what is it?
A: It means this KDZ wasn't meant for your specific variant but it shouldn't be an issue or actually do anything other than annoy on boot. You can fix it by using root to delete wha's in your "cust".. the error should go away then. Or find/flash the proper KDZ for your region. Or just deal with it.

Q: I am missing feature _______ after flashing this, where did it go?
A: The "cust" partition often controls various options.. enabling and disabling them. Sometimes the cust in this rom may differ from your original software. Usually issues with cust can be resolved by simply deleting everything in your cust folder.. but this needs root. No root? You'll either have to deal with it or flash the proper KDZ for your specific variant.

Q: LGUP isn't working because ________ what should I do?
A: Try the LGUP G5 thread here.

Share on Google Plus

About Unknown

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.